concrete pump trucks. One of the most common questions is about how these trucks manage to pump concrete in large construction sites and what mechanism are used to ensure they are effective. First of all, let’s find out the meaning of a concrete pump truck. It is a large diesel-powered truck with a huge pump and an extendable hose used to place concrete for basement floors, pool decks and anything else that cannot be reached by chutes and other techniques. The Mechanism behind a Concrete Pump Truck A given amount of concrete is transported to the truck by a cement mixer. Once the concrete gets into the hopper, it is sucked into a valve at small intervals before being directed to the pipe. The concrete is constantly pushed through the pipe to allow for more sucking. This process happens continuously until the concrete reaches its preferred destination. The large drums on the truck are constantly rotating to prevent the cement from hardening prematurely. Water and other additives are added in the mixer and not the truck. Therefore, the truck only does the pumping mechanism. The extendable hose on the truck has a length ranging from 55 to 200 feet when straightened. It can be folded into three or four sections and determines how far the truck will be located from the where the concrete is to be placed. The truck can pump up to 240 yards of concrete per hour. The pumps are powered by the truck’s engine in a power take-off configuration. Advantages of Concrete Trucks A pumping truck in Dallas, TX, has a wide area of coverage when compared to other means of placing concrete. It can reach greater heights and access complex backyards. The truck places the concrete right where you need it, helping you avoid wastage. Pumping concrete with a truck is fast and economical. It reduces the amount of manpower required and saves a lot of time. There is also an increased daily production when using a concrete pumping truck in Dallas, TX. You can deploy the labor resource more efficiently and get more things done within a day. How to Operate Concrete Pump Trucks Safely A concrete pump truck in Dallas, TX has a set of safety regulations everyone must follow. These regulations require operators to be aware of the safety hazards and come up with a plan to minimize them. For instance, operators are required to take the pump out of gear before opening the hopper for cleaning and maintenance. The accumulator should be at zero pressure. The hopper gate interlock switch should not be disabled at any moment. The operators should also be in a position to identify potential problems and warn workers to clear out. Maintaining the Truck A concrete pump truck in Dallas, TX requires regular maintenance to function optimally. The maintenance schedule should be backed by an on-site service and pump repair. Regular maintenance will ensure that the truck runs at the safest standards. You can get a concrete pump truck in Dallas, TX at an affordable rate through Anani Pumping. You only need to do your research to find out the type of truck that can suit your construction needs.